No title
SoTL
Filtyp
SoTL
In this first clinical trial liposome-encapsulated iodixanol, CT particles (CTP) were studied. The aims of the present trial were to assess the efficacy of CTP in CT and to determine the safety of different doses of CTP. A total of 47 healthy volunteers were enrolled in the present study. The CTP was administered at doses 10, 30, 70 and 100 mg encapsulated I/kg bw. Efficacy was assessed using sing
Critical load calculations in the Czech part of 'the Black Triangle' show exceedance of critical load in 75% of the forest area. A comparison with forest damage data shows an insignificant tendency toward more forest damage in areas with high exceedance. We conclude that high exceedance of critical load is a probable contributing factor to forest damage in the area.
A method for the determination of electron density using a narrow beam attenuation geometry is described. The method does not require that the elemental composition of the phantom materials is known. The Hounsfield numbers for the phantom materials used were determined using five different CT scanners. A relationship between Hounsfield number and electron density can thus be established, which is
Currently in Europe as well as in the United States, an increasing proportion of very old people remain living in their homes despite declines in physical and mental health. Together with the fact that the population of very old people is rapidly increasing (Mathers, Sadana, Salamon, Murray, Lopez, 2001; United Nations Development Programme, 2001), this poses new challenges to societal planning an
A model for a special configuration in triaxial odd-odd nuclei is constructed which exhibits degenerate chiral bands with a sizable rotation, a manifestation of dynamical spontaneous symmetry breaking. A quantum number obtained from the invariance of the model Hamiltonian, which characterizes observable states, is given and selection rules for electromagnetic transition probabilities in chiral ban
In the present paper, an optimization of the draw-in of an automotive sheet metal part has been carried out using Response Surface Methodology (RSM) and Space Mapping technique. The optimization adjusts the drawbead restraining force in the model such that the draw-in in the FE model corresponds to the draw-in in the physical process. The conclusion of this study is that Space Mapping is a very ef
Purpose: To provide a guideline curriculum covering theoretical and practical aspects of education and training for medical physicists in radiotherapy within Europe. Material and methods: Guidelines have been developed for the specialist theoretical knowledge and practical experience required to practice as a medical physicist in radiotherapy. It is assumed that the typical entrant into training w
A simple method is tested for scaling climate-extreme results from high resolution regional climate models (RCMs) to time-periods and emission scenarios for which the RCMs have not been run. The 30 yr mean relationships between indicators of extremes (IoEs) and annual mean daily maximum temperature (T-xa) are investigated. Such relationships from the UK Met Office Hadley Centre RCM HadRM3P, along
This work describes a novel approach to detoxify lignocellulosic hydrolysates and facilitate the analysis of inhibitory compounds, namely supercritical fluid extraction (SFE). The efficiency of the fermentation of lignocellulosic dilute-acid hydrolysates depends upon the composition of the hydrolysate and the organism used. Furthermore, it has been shown that inhibitors in the hydrolysate reduce t
Adverse and analgesic effects of acupuncture during the second and third trimesters of pregnancy were studied retrospectively in an observational study including 167 consecutive patients with lower back pain, pelvic pain, or both. In each patient acupuncture was given on at least two different occasions by three manual stimulations of two or more acupuncture or tender points, mainly LR-3 and LI-4
The plasma membrane H+-ATPase is activated by binding of 14-3-3 protein to the phosphorylated C terminus. Considering the large number of 14-3-3 and H+-ATPase isoforms in Arabidopsis (13 and 11 expressed genes, respectively), specificity in binding may exist between 14-3-3 and H+-ATPase isoforms. We now show that the H'-ATPase is the main target for 14-3-3 binding at the plasma membrane, and that
The effectiveness of extracting p,p'-DDT and p,p'-DDE from aged contaminated soil samples by means of pressurized liquid extraction (PLE) was evaluated. Two soil samples, which were contaminated more than 10 years ago, were used in the investigation. The static extraction time was optimised and then validated against the total sum of target analytes obtained from multiple sequential extractions. T
Mucosal Toll-like receptors (TLRs) respond to pathogens, but remain inert to the indigenous flora, suggesting that the TLRs can receive pathogen-specific signals. For example, TLR4 signalling is activated in CD14-negative epithelial cells by P-fimbriated, uropathogenic Escherichia coli, but not by lipopolysaccharide. The fimbriae use glycosphingolipids as recognition receptors and there is release
The main concern about the technology for the production of hydrogen and transport fuels by biomass gasification is the presence of contaminants (H2S, tars, fly ash, alkali, and heavy metals, ammonia) that are poisonous for the catalysts used for upgrading the biomass-generated gas. The impact of the main contaminants on a Ni/MgAl(O) reforming catalyst was studied in a laboratory environment, by e
We compare different procedures for combining fixed-order tree-level matrix-element generators with parton showers. We use the case of W-production at the Tevatron and the LHC to compare different implementations of the so-called CKKW and MLM schemes using different matrix-element generators and different parton cascades. We find that although similar results are obtained in all cases, there are i
Poly(arylene ether sulfone)s have been functionalised with alkyl side chains carrying phosphonic acid and bis(phosphonic acid) in order to investigate their properties as membrane materials. The phosphonated and bisphosphonated polymers were synthesised via lithiation of poly(arylene ether sulfone)s, followed by reactions with triethyl 3-phosphonopropionate and tetraisopropyl vinylidenediphosphona