Filtyp
In strategic management, the concept of organizational capabilities appears in two sets of related literatures: the resource-based view and the dynamic capabilities approach. The resource-based view treats organizational capabilities as unitary factors that explain cross-sectional industry performance differentials. The dynamic capabilities approach, on the other hand, treats organizational capabi
Abstract in UndeterminedExtreme down-scaling of nanoelectronic devices by top-down fabrication methods may be hindered by several obstacles, such as the cost for patterning and processing, or inferior device performance due to process-induced damage. In this presentation I will present a bottom-up approach for nanometer-scale device fabrication, based on seeded growth of semiconductor nanowires, u
The knowledge concerning electricity consumption, and especially load demand, in Swedish commercial buildings is very limited. The current study deals with methods for electricity consumption indicator development and application of the different methodologies on measured data. Typical load shapes and consumption indicators are developed for four different types of commercial buildings: schools, h
In this paper 3D electromagnetic simulations of an antenna array have been performed. The array is intended for automotive radar applications at 24 GHz. It is constructed from dipole antenna element patches, which are fed in the center by a differential signal. The dipole antenna element patches are simulated assuming a standard off the shelf substrate. They have a standing wave ratio less than 3
Fuel cells, redox flow batteries and some water desalination technologies such as reverse osmosis and electrodialysis require efficient ion exchange membranes to perform in an optimum way. Thus, by enhancing the properties of these membranes there is a possibility to improve this type of applications and technologies. Depending on the specific application, anion or proton exchange membranes with g
From a universal design perspective, products should attract both people with disabilities and other persons. Design of chairs has decisive importance for activity and independence of users with physical disabilities. In an experimental study aiming at an easy chair with universal design qualities, six able-bodied young adults were asked to position a wide range of photo-represented chairs, includ
Wind turbines operating in wind farms are coupled by the wind flow. This coupling results in increased turbulence levels for downwind turbines, and consequently higher maintenance costs. In this paper, we consider a scenario where a wind farm is asked to produce less than maximum power. The objective is to minimize fatigue loads on the turbines, while maintaining the desired power production. We s
Elsystemet står inför en stor förändring som kommer av omställningen till ett utsläppsfritt samhälle. Elsystemet är en central del av vår samhälleliga infrastruktur och dess utveckling har till stor del styrts av politiska beslut även om marknaden fått allt större utrymme sedan 1990-talet. Stora tekniska system utvecklas alltid i samklang med samhällets institutioner där samhällets ramar och regl
Continued CMOS scaling is expected to make future micro-processors susceptible to transient faults, hard faults, manufacturing defects and process variations causing fault tolerance to become important even for general purpose processors targeted at the commodity market. Tomitigate the effect of decreased reliability, a number of fault-tolerant architectures have been proposed that exploit the nat
Scan circuit testing generally causes excessive switching activity compared to normal circuit operation. This excessive switching activity causes high peak and average power consumption. Higher peak power causes, supply voltage droop and excessive heat dissipation. This paper proposes a scan cell reordering methodology to minimize the peak power consumption during scan shift operation. The propose
