Sökresultat

Coherent tunneling processes of multiple Cooper pairs across a Josephson junction give rise to high harmonics in the current phase relation. In this work, we propose and study Josephson junctions based on semiconductor-superconductor-ferromagnetic insulator heterostructures to engineer nonsinusoidal current-phase relations. The gate-tunability of the charge carriers' density in the semiconductor,

Contaminated sediments originating from dredging activities in a nuclear power plant site were placed in a pond, which has to be taken into consideration during the future decommissioning process. The sediments have to be handled to free release the site. The radionuclides Co-60 and Cs-137 were identified and the activity concentrations (Bq/kg) were quantified in the range of 10-6000 and 5-50 Bq k

A large outbreak of enterohaemorrhagic Escherichia coli (EHEC) infections occured in southern Sweden during autumn 2002. A matched case-control study was performed and indicated an association between consumption of fermented sausage and EHEC infection (odds ratio 5.4, P<0.002). Pulsed-field gel electrophoresis analysis identified a strain of E. coli O157:H7 in clinical faecal isolates which was i

Experimental data for through-drying of tissue at intensities comparable to industrial conditions arc presented. The study covers three basis weights, 20, 30 and 40 g/m(2), dried at drying air temperatures of 100, 150 and 200 degrees C. Unlike most experimental data on through-drying in the literature, the experiments in this study were performed under conditions of constant pressure drop across t

The Natural gas Combined Cycle (NGCC) with post combustion capture using liquid solvents may in some cases be of interest to design with a flexible steam bottoming cycle, so that it can operate both with and without CO2 capture. It is then important that the choice of the low pressure (LP) steam turbine exhaust size is made accordingly. The paper describes why a flexible NGCC requires a LP steam t

There is currently no clinically available drug with neuroprotective properties to limit the evolving cell death following e.g. stroke or traumatic brain injury. The mitochondrial permeability transition (mPT) is a potential pathological mechanism causing cell death in the CNS. As the name implies, the mPT is defined by a sudden increase in permeability of the inner mitochondrial membrane, whose n

An all digital phase-locked loop (ADPLL) has been implemented in a 90-nm CMOS process. It uses a phase-frequency detector (PFD) connected to two time-to-digital converters (TDC). To save power the TDCs use delay line cells with uneven delay time. During frequency acquisition an automatic tuning bank controller selects active bank of the digitally controlled oscillator (DCO), which features three s

Free radical polymerization of acrylate counterions to cationic alkyltrimethylammonium surfactant ions was performed in aqueous media. The results of the reactions were either formation, destruction or change of liquid crystalline surfactant structures, depending on the starting conditions such as the surfactant concentration, the content of inert counterions and the monomer-to-initiator ratio. Th

Five molybdenum oxide samples, subjected to conditions of oxidative ammonolysis and ammoxidation of toluene at 450 and 460°C, respectively, have been characterized using X-ray diffraction, scanning and transmission electron microscopy, and specific surface area measurements. In oxidative ammonolysis, the relatively large, freshly prepared MoO3 crystals are reduced to smaller MoO2 crystals with a c

This working paper discusses the different Asian experiences of the Green Revolution from the late 1960s to the 1980s in the perspective of earlier developments of agricultural intensification. The intention of the paper is to identify common features and conditions contributing to the considerable success of Asian agriculture over the past 30 years. The authors argue that the Green Revolution mus

The removal of color and chemical oxygen demand (COD) from simulated dye wastewater containing Acid Orange II was experimentally investigated using coagulation-electrooxidation. Two kinds of coagulation methods, ferrous-mediated coagulation and electrocoagulation were tested as pretreatment. The electrooxidation was carried out in a cell with a three-phase three-dimensional electrode using granula

Proton motions in hydrated proton conducting perovskites BaZr(0.90)A(0.10)O(2.95) (A = Y and Sc) have been investigated using quasielastic neutron scattering. The results reveal a localized motion on the ps time scale and with an activation energy of similar to 10-30 meV, in both materials. The temperature dependence of the total mean square displacement of the protons shows an onset of this motio

Ammoxidation of 3-picoline was studied on reduced V-Ti-O catalysts with V6O13 as the major vanadium oxide. The results showed that the initial activity as a function of the TiO2 content reached a maximum at 50–60 mole% TiO2. It is proposed that there is maximum contact between the vanadium and titanium phases at this composition, which results in a weakening of the (VO)3+ surface bond. The selecti

Popular Abstract in Swedish De senaste årens framsteg inom bioteknologin har medfört att det utvecklas allt fler proteinbaserade läkemedel. Detta innebär att vi har fått bättre mediciner mot allvarliga sjukdomar, men tyvärr måste proteiner nästan alltid tas med spruta, och ofta krävs långa behandlingar med dagliga injektioner. Det finns även andra grupper av läkemedelssubstanser som ökar i omfattnControlled-release formulations reduce the frequency of injections and better maintain plasma concentrations within the therapeutic window. Poly(D,L-lactide-co-glycolide) (PLG) is currently the most frequently used biodegradable polymer for this application. In order to be able to control the release rate, it is vital to know the underlying release mechanisms. A novel method for measuring the diff

interactIVe introduces active intervention safety systems in order to increase traffic safety. The interactIVe functions are – depending on their purpose – able to brake and steer autonomously. Furthermore, the driver is continuously supported by interactIVe assistance systems which warn the driver in potentially dangerous situations. Seven demonstrator vehicles – six passenger cars of different v

A methodology was developed and tested in six case studies at four medium-sized manufacturing companies within the machine engineering industry. Existing and planned work environments and production processes were described with the aid of computer-generated pictures. The pictures were used within the framework of an action research methodology in which managers and those employees affected, toget

Popular Abstract in Swedish Nanotekniken håller i skrivande stund på att revolutionera samhället med nya innovationer inom exempelvis elektronik och medicin. En viktig del i detta är utvecklingen av nya och förbättrade sätt att avbilda strukturer av nanometerstorlek (en nanometer är en miljarddels meter). Avancerade karakteriseringsmetoder skapar en ökad förståelse för hur nanostrukturer beter sigUltrafast nano-optics is a new and quickly evolving research field centred around the control, manipulation, and application of light on a nanometre and femtosecond scale. This can lead to improved electro-optical devices, more sensitive spectroscopy, and real-time control of chemical reactions. However, understanding the simultaneous nanometre and femtosecond evolution of nano-optical fields requ

During the latest years the research on the effects of moisture on clothing system has been boosted. New information has revealed phenomena, e.g. “heat pipe” effect with its condensation-evaporation cycle(s) that has not been considered earlier in prediction of physiological reactions or evaluating clothing properties. Considering the material properties, e.g. the evaporative resistance measuremen

This paper presents the manufacturing experience of an outer rotor permanent magnet synchronous machine with four different stators. The advantageous features of powder technology and molding techniques are tested when constructing and manufacturing the stators for a 28-pole 30-slot machine. The selected machine configuration is taking advantages of the concept of the modular windings and at the s