Filetype
The effect of the conformational state of the polymer coil on the properties of protein-polymer conjugates has been studied for the conjugates of antibody (monoclonal antibody from 6C5 clone against inactivated rabbit muscle glyceraldehyde-3-phosphate dehydrogenase; Ab) with poly(methacrylic acid) (PMAA) or poly-(acrylic acid) (PAA). The pH-dependencies of molecular properties and structural param
Lead has traditionally been added to brass alloys to achieve high machinability, but the exact mechanisms at work are still debated. Lead-free brass alternatives could be developed if these mechanisms were better understood. Accordingly, machinability characteristics were investigated for two brass alloys with similar mechanical properties and phase composition, but with very different machining c
Prolonged hydrothermal treatment for sulfonated poly(ether ether ketone) membranes induces mechanical degradation and developing hydrophilic-hydrophobic phase separation, simultaneously. The enhanced phase separation provides incremental proton conductivity to the membranes, whereas mechanical degradation drastically reduces device stability. On this basis, we describe here the effects of two diff
A wind-borne plume of sex pheromone from a female moth or a synthetic source has a fine, filamentous structure that creates steep and rapid fluctuations in concentration from a male moth flying up the plume's axis. The firing rates from single antennal neurons on Agrotis segetum antennae decreased to nearly zero within seconds after the antennae were placed in a pheromone plume 70 cm downwind of a
Structural Health Monitoring (SHM) has been a subject of major international research in Civil Engineering structures mainly during the last 20 years. While in the beginning, SHM mainly focused on sensor developments, nowadays practical implications regarding the acquisition, collecting and processing of data are being addressed. Indeed, SHM systems have been evolving along the two last decades an
Rapid sand filtration is essential at most waterworks that treat anaerobic groundwater. Often the filtration depends on microbiological processes, but the microbial communities of the filters are largely unknown. We determined the prokaryotic community structures of 11 waterworks receiving groundwater from different geological settings by 16S rRNA gene-based 454 pyrosequencing and explored their r
The potential for replacing the fossil-based Polyoxymethylene (POM) and Polyamide 66 (PA 66) in polymer gear applications with a bio-based Polyamide 6.10 (PA 6.10) was studied and is presented in the article. The use of bio-based plastics is increasing but mostly in undemanding applications like packaging. High-performance plastics are needed in polymer gear transmissions since their operational c
With the increasing focus on reducing emissions and making fuel efficient vehicles within the automotive industry over the past few years, new methods are constantly being investigated to improve the efficiency of the powertrain. One such method is recovering waste heat from the exhaust gases as well as the coolant using a thermodynamic cycle such as a Rankine cycle. However, most studies looking
Research has shown that positive evaluations of home are important for very old people’s health, well-being and independence in daily life. The rationale for the present study derives from our survey study findings, confirming such associations also in a younger cohort (N = 371). The purpose of this study was to further increase the understanding of the dynamics of meaning of home and health among
With the increasing focus on reducing emissions and making fuel efficient vehicles within the automotive industry over the past few years, new methods are constantly being investigated to improve the efficiency of the powertrain. One such method is recovering waste heat from the exhaust gases as well as the coolant using a thermodynamic cycle such as a Rankine cycle. However, most studies looking With the increasing focus on reducing emissions and making fuel efficient vehicles within the automotive industry over the past few years, new methods are constantly being investigated to improve the efficiency of the powertrain. One such method is recovering waste heat from the exhaust gases as well as the coolant using a thermodynamic cycle such as a Rankine cycle. However, most studies looking
Purpose: The purpose of this study was to evaluate how decisions are taken in the early stages of a renovation project, up to the design brief, leading up to the decisions on how to proceed with the renovation in the design phase. Although many technical solutions are visualised in the design phase, it is in the early evaluations of needs and demands, leading up to the design brief, that set the r
Indoor localization and navigation is a much researched and difficult problem. The best solutions, usually use expensive specialized equipment and/or prior calibration of some form. To the average person with smart or Internet-Of-Things devices, these solutions are not feasible, particularly in large scales. With hardware advancements making Ultra-Wideband devices more accurate and low powered, th
The integrated forest ecosystem model ForSAFE-Veg was used to simulate soil processes and understory vegetation composition at three—sugar maple, beech, yellow birch—hardwood forest sites in the Northeastern United States (one at Hubbard Brook, NH, and two at Bear Brook, ME). Input data were pooled from a variety of sources and proved coherent and consistent. While the biogeochemical component For
It is known that the molecular architecture plays a fundamental role in the electrical and optical properties of materials processed in the form of thin films. Here, zinc phthalocyanine (ZnPc) thin films were fabricated through the vacuum thermal evaporation technique (PVD, physical vapor deposition) up to 50 nm thickness with the objective of determining their molecular architecture and some elec
Background: In the past decade the sector-wide approach (SWAp) model has been promoted by donors and adopted by governments in several countries. The purpose of this study is to look at how partners involved in the health SWAp in Bangladesh define ownership and coordination, in their daily work and to analyse the possible implications of these definitions. Methodology: The study object was a proce
Arrangements for collaboration in knowledge production across academia, government, non-governmental organisations, and corporations have several names, such as citizen-science, community-based participatory research, engaged research and hybrid forums. The multiplicity of schemes does not lie only in the high number of names for various versions of collaborative knowledge production. Different sc
Periprostheteic joint infection (PJI) is a rare complication of arthroplasty with severe consequences for the affected patients. PJI most often necessitates additional surgery and prolonged courses of antibiotic treatment, leading to worse functional results and increased societal costs. Evaluating treatment of PJI as well as preventive efforts are essential to increase our understanding of PJI an
Current scholarship on race in Europe has described race as an “absent presence”. However, little is known about the dynamics of the absentness and presentness of race, including how various social processes operating at distinct levels (e.g., supranational and national) influence the uses of race and ethnicity concepts. We begin addressing this gap by examining racialised pharmaceutical regulatio
In boreal summer, circumglobal Rossby waves can promote stagnating weather systems that favor extreme events like heat waves or droughts. Recent work showed that amplified Rossby wavenumber 5 and 7 show phase-locking behavior which can trigger simultaneous warm anomalies in different breadbasket regions in the Northern Hemisphere. These types of wave patterns thus pose a potential threat to human
