Filetype
The learning parity with noise (LPN) problem has recently proved to be of great importance in cryptology. A special and very useful case is the Ring-LPN problem, which typically provides improved efficiency in the constructed cryptographic primitive. We present a new algorithm for solving the Ring-LPN problem in the case when the polynomial used is reducible. It greatly outperforms the previous al
Multi-site multi-antenna measurements for semiurban microcell environment at 2.6 GHz are performed with four base stations (BSs) and one mobile station (MS). Three BSs are provided with four antenna elements in closely spaced copolarized configuration, and one BS is provided with a single antenna element. The MS is equipped with a cylindrical uniform array consisting of 64 dual-polarized antenna e
Abstract in UndeterminedMultiple-antenna handheld terminals are an integral part of the latest mobile communication systems, due to the adoption of multiple-input multiple-output (MIMO) technology. In this contribution, MIMO performances of three multiple-antenna configurations for smart phones are investigated in an urban macrocellular environment, based on an extensive MIMO measurement campaign
Context: Test driven development (TDD) has been extensively researched and compared to traditional approaches (test last development, TLD). Existing literature reviews show varying results for TDD. Objective: This study investigates how the conclusions of existing literature reviews change when taking two study quality dimension into account, namely rigor and relevance. Method: In this study a sys
Abstract in UndeterminedInside a tunnel, electromagnetic wave propagation differs strongly from the well understood "open-air" situation. The characterization of the tunnel environment is crucial for deploying vehicular communication systems. In this paper we evaluate vehicle-to-vehicle (V2V) radio channel measurements inside a tunnel. We estimate the time-varying root mean square (rms) delay and
An all digital phase-locked loop (ADPLL) has been implemented in a 90-nm CMOS process. It uses a phase-frequency detector (PFD) connected to two time-to-digital converters (TDC). To save power the TDCs use delay line cells with uneven delay time. During frequency acquisition an automatic tuning bank controller selects active bank of the digitally controlled oscillator (DCO), which features three s
MIMO systems ideally achieve linear capacity gain proportional to the number of antennas. However, the compactness of terminal devices limits the number of spatial degrees of freedom (DOFs) in such systems, which motivates efficientantenna design techniques to exploit all available DOFs. In this contribution, we present a compact six-port dielectric resonator antenna (DRA) array which utilizes spa
Open source software has been gaining popularity, especially among commercial organizations. The broad industry acceptance is in large part due to the demonstrated ability of open source solutions to compete with proprietary alternatives. Using open source software components enables companies to reduce their own development costs, and thus improve software development efficiency. Many open source
This paper presents a 2.45 GHz wake-up receiver front-end intended for use in sensor networks, and is designed to receive data modulated with on-off-keying. Manufactured in 65 nm CMOS it employs an uncertain IF structure with three phase passive mixer and high gain amplifier chain. With the modulation frequency response tailored to the detector behaviour, it achieves a sensitivity of -88 dBm at BE
Despite recent attempts to relax the phase-noise demands on voltage-controlled oscillators (VCOs) for cellular communications [1], mainstream radios require harmonic VCOs capable of a very low phase noise with moderate power consumption, associated to a large tuning range (TR) and a high insensitivity to interfering signals. Ideally, the TR should be in excess of one octave, since this allows the
In this paper, a novel multiple representation data structure for dynamic visualisation of 3D city models, called CityTree, is proposed. To create a CityTree, the ground plans of the buildings are generated and simplified. Then, the buildings are divided into clusters by the road network and one CityTree is created for each cluster. The leaf nodes of the CityTree represent the original 3D objects
We study the mechanical failure of cemented granular materials (e.g., sandstones) using a constitutive model based on breakage mechanics for grain crushing and damage mechanics for cement fracture. The theoretical aspects of this model are presented in Part I: Tengattini et al. (2014), A thermomechanical constitutive model for cemented granular materials with quantifiable internal variables, Part
The analysis and design of a millimeter-wave passive balun on silicon substrate with small size and good balance is presented. The reason for the imbalance of the balun is analyzed and a novel method using two grounded T bars beneath the coupled lines to tune the balance is proposed. The balun was fabricated in a 65 nm CMOS process, by using broadside coupled lines with small separation, the lengt
As a part of the LDTA 2011 Tool Challenge, we implemented a compiler for the language Oberon-0 using the metacompilation tool JastAdd. In this paper, we report on this implementation, and reflect on aspects of it such as ease of use, modularity, and safety.
We consider detection over intersymbol interference channels that are unknown at the receiver. For such a kind of systems, we consider an alternative approach to the design of a reduced-complexity receiver based on channel shortening without the explicit estimation of the channel impulse response. The proposed solution allows a simplification of the receiver architecture and a faster convergence f
Using the metric of channel capacity, three dual-antenna multiple-input multiple-output (MIMO) terminals with adaptive impedance matching were evaluated at LTE Band 13 in four different user scenarios using simulation. Each of the three terminals is equipped with a slot-monopole antenna and a planar inverted-F antenna (PIFA). The slot monopole is fixed at one edge of the chassis, whereas the locat
This paper presents a decoder for multi-carrier modulated signals employing Faster-than-Nyquist (FTN) signaling. FTN signaling is a method of improving bandwidth efficiency at the expense of higher processing complexity in the transceiver. The decoder can switch between orthogonal and FTN signaling modes and exploits channel properties to improve bandwidth efficiency. The decoder is fabricated in
